Distribution Fiber Optic Cable is ideal for applications that require a single termination point with multiple fibers. Its tight buffered design allows it to be installed as a building backbone and/or to be installed for inter-building campus applications without having the need for expensive transitions between cable types.
Distribution Fiber Optic Cable is available in 4 main fiber types: Single-Mode 9/125, MultiMode OM1 62.5/125, MultiMode OM3 50/125 and MultiMode OM4 50/125. Within these fiber types, you can choose between Plenum and Riser cable ratings with the added option of obtaining either an Indoor/Outdoor or Indoor-only jacket. Most often, Distribution Fiber Cables have strand counts ranging from 2 fibers up to 72 fibers. Although higher fiber strand counts do exist, they are referred to as a Micro Distribution Fiber.
Indoor Tight Buffered Plenum Fiber Optic Cables are specified for interior plenum building wiring applications such as in walls, between floors, and air handling ducts. In these building cable applications, the fiber must also be able to withstand the tensile stresses present during installation by the contractor. Plenum Indoor Distribution Fiber Optic Cables come in both Single-Mode and OM1, OM3 and OM4 MultiMode options.
Indoor/Outdoor Tight Buffered Plenum Fiber Optic Cables are specified for interior or exterior plenum campus or office network cabling such as between buildings, in walls, between floors, and air handling ducts. For indoor applications, the cable is plenum OFNP listed. For outdoor applications, the cable includes an outer jacket with a UV stabilizer for protection against sun-exposure- plus anti-fungus protection for underground applications. Plenum Indoor/Outdoor Distribution Fiber Optic Cables come in both Single-Mode and OM1, OM3 and OM4 MultiMode options.
In vertical runs, CyberXLink supplies riser rated cable like the Riser Indoor Distribution Fiber Optic Cable in both Single-Mode and OM1, OM3 and OM4 MultiMode options. This riser fiber distribution cable is available with up to 72 strands and can be used for indoor applications.
In vertical runs, CyberXLink supplies riser rated cable like the Riser Indoor/Outdoor Distribution Fiber Optic Cable in both Single-Mode and MultiMode options. This Riser Fiber Distribution Cable is available with up to 144 strands and can be used for both indoor and outdoor projects. It can be armored for additional strength in direct burial and aerial applications.
CyberXLink stocks a wide selection of Fiber Connectors like our Field Installable Fiber Optic FAST Connectors. These Field Installable Connectors are available in LC, SC and ST styles and come pre-polished and ready to install in the field. A boot is also provided with each connector and no epoxy is required.
If you have any questions, feel free to give us a call. 951-824-1572