Home > Fiber Solution Products > Fiber Optic Connectors > Fiber Optic SC Connectors >
Fiber Optic Pre-Polished SC Multimode 62.5/125 Connector, 12 pack
Item #: FXC-SC6-12
Availability: Discontinued
|
Comes in a pack of 12 connectors.
|
FXC-SC6-12 - Fiber Optic Pre-Polished SC Multimode 62.5/125 Connector
CyberXLink.com's Pre-Polished Fiber Connectors are the new generation in field installable fiber terminations. These connectors eliminate the need for messy epoxies and expensive tools by offering a pre-polished solution that can be installed in minutes. Pre-Polished Connectors have a pre-stubbed factory polished ferrule that joins to the fiber using a precise mechanical alignment and a special low loss index matching gel. Each Connector comes with a specially designed clip that holds the clamping devices open for the fiber to be inserted. Once the fiber is inserted, squeeze the clip to release the blades, remove clip and discard.Pre-Polished Fiber Connector Features
- Available for single-mode and multimode fibers and come in SC, ST, and LC termination styles.
- Easy to assemble.
- No expensive tools or epoxy required.
- No polishing required.
- Fiber can be re-installed.
- Meets TIA/EIA 568 performance requirements.
Connector Specifications |
| Insertion Loss (Average) |
Standard Ceramic Ferrule: 0.2dB
|
| Reflectance |
-20 dB for PC
-20 dB for Super PC
-20 db for Ultra PC
-20 dB for Angled PC |
| Durability |
≤ 0.2 dB change. 500 Rematings, FOTP-21 |
| Tensile Strength |
≤ 0.2 dB change, 15 LB, FOTP-6 |
| Temperature Cycling |
-40° to +75°, 21 cycles, <0.3 dB change |
| Material |
Ferrule: Preradiused Zirconia
Housing: Thermoplastic |