Bulk Fiber, 04 Strand, Multimode, 50/125, OM2, Breakout Cable, OFNR Riser Rated, Indoor/Outdoor, Tight Buffer, Black Outer Jacket, 2.5mm Sub-Cables, Price Per Foot

4 Fiber Breakout Cable MM 50/125 OM2 Indoor/Outdoor Riser

This CyberXLink.com Breakout Riser Cable is ideal for installations requiring an extremely rugged and reliable cable design where maximum mechanical and environmental protection are necessary. It's the easiest cable to install where direct termination of connectors to sub-units and direct run to panels and equipment is desired. CyberXLink.com Breakout Riser Cables utilize high performance components and construction and are UL Listed in accordance with NEC sections 770.179(b) for use in vertical runs in building riser shafts from floor to floor.

Laser Ultra-Fox Fiber Performance

• * Minimum Laser Effective Modal Bandwidth (EMB)
• ** For backward compatibility to LED-based systems, overfilled launch (OFL)
• ^ 1310 nm CWDM lasers (10GBASE-LX4)
• ¹ Reach assuming 3.0 dB maximum cabled attenuation at 850 nm and 1.3 dB total connection and splice loss
• ² Supports 220-meter 10GBASE-LRM distance, or 300-meter 10GBASE-LRM distance with 300-meter capable equipment
• ³ 3.5/1.5 dB/km maximum attenuation applies for DX-Series cables greater than 36 fibers, and for all DX-Series cables with armor (corrugated steel tape or interlocked armor) or any other secondary jacketing
• ⁴ 10 km for 1310 nm 1000BASE-LH, and 5 km for 1310 nm 1000BASE-LX
• ⁵ 10 km for 1310 nm 10GBASE-LR, and 40 km for 1550 nm 10GBASE-ER
• ⁶ Typical Mode Field Diameter at 1310 nm

• Applications:
  • Ideal for installations requiring an extremely rugged and reliable cable design where maximum mechanical and environmental protection are necessary
  • Easiest cable to install where direct termination of connectors to sub-units and direct run to panels and equipment is desired
• Cost Savings:
  • Direct termination to subcable may eliminate the need for patch panels and patch cords and reduces connector loss
  • 900 μm buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices because connectors terminate directly to the fiber
  • High crush resistance may eliminate the need for innerduct
• Features:
  • High performance components and construction
  • UL Listed in accordance with NEC sections 770.179(b) for use in vertical runs in building riser shafts or from floor to floor
  • Most rugged and easy to install cable design for enterprise cabling applications
  • Core-Locked™ outer jacket design for installation survivability, long-term, trouble free service
  • Ideal for use in long, vertical installations
  • 2.5mm subcables can be direct-terminated with standard connectors (2.0mm and 2.9mm subcables also available)
  • Subcabled fiber is environmentally and mechanically protected
  • Ideal for use in point-to-point runs in adverse environments
  • Direct termination to subcable provides additional strain relief for better connector retention during moves, adds, and changes
  • Design is ideal for direct pulling with mesh grips
  • Cable materials are indoor/outdoor - UV, water and fungus resistant
  • Wide operating temperature range of -40°C to +85°C
  • High performance 900 μm tight buffered coating on each optical fiber for environmental and mechanical protection
  • Interlocking armor can be applied to cables as an alternative to conduit installation
  • 2 to 72 fibers
• Standards List:
  • UL 1651
  • UL 1666
  • GR-409-CORE
  • ICEA-S-104-696
  • ICEA-S-83-596
  • TIA-568
  • TIA-598

Additional Information :