Bulk Fiber, 12 Strand, Multimode, 62.5/125, OM1, Distribution Cable, OFNP Plenum Rated, Indoor/Outdoor, Tight Buffer, Orange Outer Jacket, Price Per Foot

12 Fiber Distribution Cable MM 62.5/125 OM1 Indoor/Outdoor Plenum

This CyberXLink.com Distribution Plenum Rated Fiber Optic Cable is used in trunking, LAN and distribution applications where small size, lightweight, and versatile installation capability are required for ducts, plenums, and air handling spaces. It's ideal configuration for a single termination point requiring multiple fibers. CyberXLink.com Distribution Plenum Rated Fiber Optic Cable is a high performance components and construction and UL Listed in accordance with NEC section 770.179(a) for use in ducts, plenums and air-handling spaces. "S"Jacket Indoor-only flexible flame retardant plenum jacketed cables available.

Laser Ultra-Fox Fiber Performance

• * Minimum Laser Effective Modal Bandwidth (EMB)
• ** For backward compatibility to LED-based systems, overfilled launch (OFL)
• ^ 1310 nm CWDM lasers (10GBASE-LX4)
• ¹ Reach assuming 3.0 dB maximum cabled attenuation at 850 nm and 1.3 dB total connection and splice loss
• ² Supports 220-meter 10GBASE-LRM distance, or 300-meter 10GBASE-LRM distance with 300-meter capable equipment
• ³ 3.5/1.5 dB/km maximum attenuation applies for DX-Series cables greater than 36 fibers, and for all DX-Series cables with armor (corrugated steel tape or interlocked armor) or any other secondary jacketing
• ⁴ 10 km for 1310 nm 1000BASE-LH, and 5 km for 1310 nm 1000BASE-LX
• ⁵ 10 km for 1310 nm 10GBASE-LR, and 40 km for 1550 nm 10GBASE-ER
• ⁶ Typical Mode Field Diameter at 1310 nm

• Applications:
  • Used in trunking, LAN and distribution applications where small size, lightweight, and versatile installation capability are required for ducts, plenums, and air handling spaces
  • Ideal configuration for a single termination point requiring multiple fibers
• Features:
  • High performance components and construction
  • High specific strength-to-weight ratio and compact cable design for limited conduit space and tight bends in long cable pulls
  • Helically stranded core for flexibility, survival in difficult installations, and mechanical protection for the fibers
  • Lower installed cost
  • High performance tight-buffered coating on each fiber for environmental and mechanical protection
  • High crush resistance may eliminate the need for innerduct
  • 900 μm buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices because connectors terminate directly to the fiber.
  • UL Listed in accordance with NEC section 770.179(a) for use in ducts, plenums and air-handling spaces
• Indoor/Outdoor ("K" Jacket)
  • Indoor/Outdoor plenum cables eliminate the need for costly cable transitions in different installation environments
  • Cable materials are UV, water and fungus resistant
  • Higher fiber counts available than similar cables available by others in subgrouped configuration
  • Jacket is highly chemical resistant for installation in harsh industrial environments
  • Interlocking armor can be applied to cables as an alternative to conduit installation
  • Can be installed outside and in plenum or riser pathways inside, eliminating the need to transition cable types between environments
  • 2 to 72 fiber configuration is smaller and lighter than comparable sub-grouped cables, which is ideal for installation in areas with limited space or tight bends
• Standards List:
  • UL 1651
  • ANSI/NFPA 262
  • GR-409-CORE
  • ICEA-S-104-696
  • ICEA-S-83-596
  • TIA-568
  • TIA-598

Additional Information :