100% Satisfaction Guarantee
Low Voltage Cable Superstore
Ph: 951.824.1572
Search:
Home > Made in USA > Fiber Optic Networking > Tracer Tape

Tracer Tape

Fiber Optic Tracer Pull Tape Made in the USA

American Made Fiber Optic Tracer Pull Tape

A successful fiber optic installation begins with the application of fiber optic tracer tape. Using pull tape prevents friction damage to the fiber being installed, and also protects the installer. When fiber optic cable is installed, there is a tendency of cable under high tension to elongate and sometimes break. When cable snaps back, it can injure the installer.

CyberXLink’s pull tape has high tensile strength and is lubricated to prevent damage to the fiber, or to the installer. A common pull tape CyberXLink offers is the Pull Tape, 1,250 Pound Tensile Strength Woven Polyester.Silicone lubricant reduces the possibility of cable burn-through. The tracer tape is composed of high tensile, low shrink polyester fibers.

The pull tape has printed sequential footage markings for accurate measurements. This one pull tape does is easily used without strings, ropes, or winch line pulling. It is easily blown through conduit or air ducts.

CyberXLink’s pull tape is available in 1,250 pound, 1,800 pound, and 2,500 pound tensile strengths, and is priced by the foot. We also have pull tape with either one or two 22 AWG diameter locater wires. Our tracer tape is extrusion friendly, and can be either pre-inserted into the duct by the manufacturer, or blown into the duct at the job site.

CyberXLink also provides a variety of fiber cable management solutions like D-rings and cable managers. Our Cable D-Rings for PDU Manager provide a safe passageway along vertical and horizontal lines for fiber optic cable. This set of ten d-rings feature tool-less mounting, and can be rotated and configured to any particular routing strategy. Whole bundles of cable can be routed through a d-ring while allowing access to single cables for later maintenance.

Another popular cable management option when installing with fiber optic cable is the Vertical Slotted Duct Cable Manager. This seven foot finger duct cable manager provides vertical fiber cable management on the side of a network rack. The slotted ducts are designed to allow cables to be routed as necessary to patch panels, servers, or switches as required. Removable covers makes cable management easy and neat.

Thank you for considering CyberXLink as your fiber optic tracer tape supplier.

If you have any questions, feel free to give us a call.951-824-1572

Show
Products 1-3 of 3
Tracer Tape II Woven Polyester 22AWG Locater Wire
Item #: WPTT###0 -
No reviews yet
Rating: none
Availability: Min. Qty. Order
Price: $0.21-$0.28

Tracer Tape Woven Polyester 22AWG Locater Wire
Item #: WPT###0 -
No reviews yet
Rating: none
Availability: Min. Qty. Order
Price: $0.13-$0.19

Pull Tape Woven Polyester
Item #: WP###0 -
No reviews yet
Rating: none
Availability: Min. Qty. Order
Price: $0.11-$0.19

Products 1-3 of 3